INSTRUCTIONS FOR USE:
Before using the powder, a semi-permanent varnish in the color of your choice is required.
Immediately after applying the No Wipe Top Coat, cure for 30 seconds and then apply the special brush with a sponge and a small amount of powder
Rub until it gives you the desired result.
Apply Top Coat and polymerize for 2 minutes in UV or 10-30 seconds in LED, depending on the device you are using.
The application is complete!
Step 1: Soak the cotton with clean acetone.
Step 2: Place it on the nail and wrap it with foil.
Step 3: Wait for 2 to 5 minutes.
Step 4: Remove the foil with the cotton and gently remove the varnish.
Or removal with a nail wheel