Ωράριο Λειτουργίας Δευ-Παρ: 10.00-20.00 | Σαβ: 10.00-16.00 | Κυριακή: Κλειστά

Ceramic Round Top Large Green Barrel Bit Nail Drill For Removal and Grinding

8.50

SKU: 004894
Category:

High-strength ceramic milling machine that does not heat up and does not wear easily.

Ceramic cutters are ideal for various uses and are an essential tool for any nail technician using a wheel.

With ceramic cutters you can easily and quickly remove semi-permanent, artificial, or gel. The material is removed in seconds while you have complete control of the removal. Quickly, easily and without burning the nail.

Ceramic milling cutters are ideal for:

Semi-permanent or hybrid removal
Gel removal
Acrylic removal
To give shape to the nail
To smooth the acrylic or gel
To remove combi (combi manicure)

Shape: Flat Barrel

The general rule for use in each milling cutter is:

Nose: For cutaneous or podological works.
Barrel: For material removal, pedicure or nail formation.
Cone: For material removal, nail formation or artificial shaping
Balls: For cast or for work
The above categories are general and there are several variations on shapes. For example there is a pointed with an oval or with a very pointed edge. There is a barrel that has corners or an oval edge. Small or large ball. Cone small or large. The differences are depending on what suits each technician and what exactly application he wants to do. The choices, combinations and uses are endless.
Of course, you can use the milling cutters as you wish. The suggested applications depending on the shape are so that you can better understand their use before purchasing the respective products.
Sterilization
All milling cutters are always sterilized at a high temperature. You can put them in the crystal sterilizer or in a high temperature oven. Do not sterilize them in UV as it does not offer protection against viruses and fungi.
Before inserting them into the sterilizer, remove the plastic ring if any. Usually this ring is also ceramic, but sometimes it can be plastic. Do not leave them in the sterilizer for a long time. Besides, in 5-10 minutes they have been completely sterilized. Sterilization is essential and should never be neglected.
Colors:
The colors in each milling cutter indicate its roughness and not its hardness, as many believe.
The material is the same in all colors.
What changes is how rough the surface is.
The rougher the surface, the more material they remove.
The classification in relation to roughness is:
Red: a little rough
Blue: moderately rough
Green: very rough